This article shows you how to set up the Wavlink Extender so that it can connect to a wireless internet modem or router through the website wifi.wavlink.com. With a WIFI booster, you can boost the signal of your existing wireless network and make sure that devices from far away can always connect.
The web address Wifi.wavlink.com is the only way to connect to the wireless range extender. Users must go to Wifi.wavlink.com to set up a web-based connection between a WiFi repeater or extender and the main modem or router.
Here’s how to get to the page where the Wavlink extender is set up:
- Switch the wireless repeater to “repeater mode” after turning it on.
- When the power light comes on, use a laptop or tablet.
- You can use Wi-Fi to connect to the EXT network.
- Once you’re connected, you can open any web browser, such as Mozilla Firefox, Google Chrome, or Microsoft Edge.
- Then type Wifi.wavlink.com in the address box.
- Now, it will take you to a screen where you can set up. By default, type “admin” where it says “password.”
- Once you are logged in, follow the steps on the screen to connect your repeater to your main modem/router.
Here are the steps you need to take to set up your account on wifi.wavlink.com.
- Check out the site.
- Go to wifi.wavlink.com and look for “setup.”
- Wait until you can’t find the page for web administration.
- The first thing you’ll do is go to the web admin page.
- To get there, click the Wavlink extender login button.
- Type the username and password that Wavlink gave you into the admin box.
- Then, click the option to log in to Wavlink extender.
- Now, you have to click on the Wavlink extender setup option.
- It will let you control and change your extender’s settings.
- If you want to change the password for the Wavlink extender, find the option to “change password settings” and follow the steps shown on the screen.
- In the end, make all of the changes you need to make and save them all to finish setting up the Wavlink extender.
How do I manually get to the Wifi.wavlink.com sign-in page?
Let’s quickly talk about how to manually set up the Wavlink extender:
- Join your main modem or router to your Wavlink extender.
- When the firm power light on the extension comes on, you’re ready to go.
- Get out your laptop, tablet, phone, or anything else that can connect to wifi.
- Then, go to the settings on your wifi device and choose the wifi option.
- The network will be called Wavlink Extender Setup Ext.
- Once you’re on the ‘EXT’ network, type Wifi.wavlink.com into the address bar of any web browser.
- You’ll be taken to a new page where you can set up the extension.
- You should start at Wavlink.com. Follow the instructions for setting up the extender to install and connect it.
Not working: wifi.wavlink.com
Your router and extender aren’t set up right, so wifi.wavlink.com won’t work. Also, this problem is caused by a lot of different things. Using the tips and tricks below, you can get rid of it.
wifi.wavlink.com won’t work if your computer isn’t connected to the Wavlink network through a stable connection. If you have a problem, try the following.
- To connect your computer to a stable network, put your router in an area with a good signal and your extender in the middle.
- Besides that, make sure that the signal lights on the Wavlink extender work after it has been connected to the router. If it doesn’t work, your device isn’t set up correctly. So, I set it up again after I turned it back on.
- You can connect your computer to the Wavlink extender network if you know the right username and password. You might not be able to get to wifi.wavlink.com if your device isn’t connected to the same range extender.
- If the problem keeps happening, you need to reset your Wavlink range extender to the settings it had when it came from the factory. Here’s what you need to do to reset the Wavlink extender.
How do I get the latest firmware from Wifi.wavlink.com?
Through the process of updating the booster’s firmware, any errors or lags that manifested themselves while it was being utilised can be remedied. Despite this, the official company does not recommend that any of you update the operating system of the Extender if it is already functioning properly.
When it is necessary to update the software on your Wavlink extender in order to make it function more effectively and precisely. To make this happen, you need to do everything that is on this list.
- To update the firmware on your booster, navigate your web browser to the ap.setup website.
- You will need to extract the file that you downloaded in order to get the firmware file.
- Launch your preferred web browser and navigate to the Wavlink page on the web, or type 192.168.10.1 into the address bar of your browser to get there directly. Now, select “Setup,” then select “Upgrade Firmware” from the menu that appears.
- To open the firmware file that has been extracted, you will need to tap the button labelled Choose File/Browse.
- Tap “Apply,” and then wait for the update to finish installing. This concludes the process.
- If you update the firmware on your booster to the most recent version, it will solve all of the issues that you are experiencing with your repeater.
- Once you apply the update, your Wavlink Wi-Fi range extender will also be equipped with a great deal of new features and modifications.
How to restart the Wavlink extender
- Make sure that the Wavlink extender is properly plugged into an electrical outlet before attempting to reset it to its factory settings.
- Find the hole on the repeater that the pin goes into that will allow you to reset it to the factory settings.
- To reset the device, insert a paper clip or toothpick into the hole and press and hold the reset button for ten to fifteen seconds.
- The power led light on the wireless booster will turn from white to amber when you perform a reset on the device.
- Please wait until the power indicator LED light turns completely green.
- Repeat the steps from the previous section in order to set up the Victony WIFI extender.
Ways to fix problems with Wifi.wavlink.com
-
- It is recommended that you position your wavlink close to your router.
- You will need a mobile device, a desktop computer, or a laptop in order to access the page.What is
- A local page can be found at wifi.wavlink.com.
- In order to acquire the address, you will first need to establish a connection to the repeater.
- Check that the power indicator light on the extender is illuminated.
- You can use a web browser such as Google Chrome, Microsoft Edge, Safari, or another one to access the wavlink setup page.
Wifi Extender Setup is an independent company that operates as a service provider. All mentions of trademarks, brands, products, and services are provided solely for the purpose of providing additional information. Wifi Extender Setup is in no way affiliated with any of these businesses, and it is imperative that this point be made abundantly clear
